Poweradd Wireless Bluetooth Earbuds 5.0, TWS Stereo Headphones With Charging Case, Touch Controls, Waterproof, Suitable For Sports
Bluetooth 5.0 Earbuds& Widely Compatible
Bluetooth 5.0 technology provides faster pairing, more stable connection and signal transmission. These two wireless earbuds are widely compatible with Bluetooth-enabled devices with Android, iOS systems.
CVC.8.0 Noise Cancelling
The wireless Bluetooth earbuds with CVC.8.0 technology, allow you to enjoy clear call quality even in noisy environments.
Long Playtime & Power LED Display
Charge on-the-go. Wireless Bluetooth earbuds provide up to 4 hours of playtime on a single charge. The earbud charge case was adopted an LED display design, so you can check battery consumption anytime.
Smart Touch Control& One-Step Pairing
Each Bluetooth earphone has the function of answer/reject phone, switch music, volume control, and voice assistant. Simply take the earphones out of the charging case and they will automatically connect to your phone after being paired the first time. Perfect for workout, home office and running, etc.
Features an ergonomic design, each wireless earbud only weighs 3 grams, ensures hours of comfortable wear and a snug-fitting listening experience.
Product Type: Bluetooth Headset
Sound system: Wireless stereo
Controls: 1 physical button
Bluetooth version: V5.0
Bluetooth operating frequency: 2.402GHz-2.480GHz
Receiving sensitivity (TYP) : -85dBm
Effective Bluetooth distance:≤10m
Speaker power: 3mW
Headset RF power level: Class2
Headphone amplifier type: chip built-in
The audio signal to noise ratio S/N: ≥90dB
Frequency response: 50Hz～20KHz
Speaker unit: Full-range speaker Φ8 32ohm
Microphone: Silicon microphone, -42dB ±3DB, 1.19
Internal battery: Li-ion battery - 3.7V,50mAh (501015)
Music time: approx. 3 hours (60% volume)
Talk time: approx. 3 hours (60% volume)
Charging input standard: with own charging compartment
Charging time: approx. 1.5 hours
Battery cycle life: ≥ 300 charge/discharge cycles
Waterproof rating (charging compartment is not waterproof): IPX4
Dimensions of charging compartment: Size: 7.9*5.2*3.2cm Net weight: 89g
Charging compartment capacity: 1200mAh
Charging bin to headset charging times; 7-10 times
Distortion rate: 50-3kHz<5% with input 0.179V for B&K Use B&K at 0.179 test voltage, 50-3KHz
Charge input voltage range:4.8-5.2V
Bluetooth connection operation
1. Keep your Bluetooth headset and mobile phone (or another connected device) within 1m of each other, the closer the better
2. Make sure the headset is switched off, press and hold the multi-function button for about 3 seconds until the white/blue light flashes alternately, then enter the pairing state and wait for the connection.
3. Turn on the user's mobile phone Bluetooth function (or other Bluetooth devices), and search or scan, at this time the phone will search for all nearby Bluetooth devices, tap the name of the headset searched: HBQ-Q82.TWS, and enter the password 0000 (currently most mobile phones do not need the code), successful pairing connection, the headset indicator turns to blue flashing, indicating that the pairing connection is successful! At this point, you can make mobile phone calls and listen to songs!
4. If there is an inability to team or connection interruption in or monaural connection to another headset connection interruption, please try again after shutdown, or restore the factory settings
5. Restore factory settings: turn off the state, while touching the two headsets on the key for 10 seconds blue light on once, then white and blue lights alternately flashing, then later white and blue lights flashing 2 times at the same time white and blue lights alternately flashing and complete the factory settings, then the two headsets back to the charging bin charging, then pick up the boot into automatic pairing mode.
6* spare earbuds S/M/L